How to Connect Two Vizio Soundbars Together?

This post may contain affiliate links which means we may receive a commission for purchases made through links. Read more on our Privacy Policy.

It is possible to have a very satisfying audio experience if you invest in a mid-range to high-end Vizio soundbar. However, if you aim to further enhance the sound quality in terms of loudness or you are intended to enable surround or stereo sound, in case your one Vizio soundbar does not have these functions, connecting two Vizio soundbars together will be a good idea.

So, how to connect two Vizio soundbars together?

In Short, in order to connect two Vizio soundbars together, you need to plug one side of the cable into the output port of the first Vizio soundbar and the other side into the input port of the second soundbar. After that, turn on the devices and make sure they are set to the appropriate audio settings.


Can You Connect Two Soundbars Together?  

Yes, connecting two soundbars together is possible and in most cases simple. However, as you know there are a lot of soundbar brands on the market, so it is obvious there can be some compatibility issues. Even the ports may look the same but they can be different.

So, it is recommended if you are looking to buy two soundbars, always choose the same brand and model.

Choosing the same brand and model will not only allow you to have the same caliber of sound from both soundbars as that particular model is known for. In addition, there will be no connectivity issues.

If you already have two different companies’ soundbars or two different models of soundbars, see if they have appropriate ports or jacks to connect each other. If yes, then congratulations, if no, maybe you will not be able to connect them together, or perhaps you have to look for a particular method.

How to connect two Vizio soundbars together: Procedure

Following are the steps that will guide you through the setup of connecting two Vizio soundbars together:

  • Locate output jacks on each soundbar
  • Connect both soundbars via audio cable
  • Turn On the soundbars and Test the connections
  • Appropriate Audio Customization 

1) Locate output ports on each Vizio soundbar

First of all, you need to find the output jack of the first sound system before you can connect the two soundbars together. Usually, it’s positioned at the rear side of the soundbar. The manufacturer usually identifies it as Output or Headphones.

On the other side, you have to locate the input port for the second soundbar. It is commonly identified as the input of a mic.

2) Connect both soundbars via audio cable

Take one side of the audio cable and plug it into the port on the back of the first sound bar so that it can output the audio. After that, plug the other terminal of the cable into the output slot on the second sound bar.

3) Turn On the soundbars and Test the connections

As soon as the audio cables have been connected, turn on both of the soundbars. You can play the first soundbar into the second soundbar and vice versa.

Keep in mind that a number of adjustments may need to be made to the sound system depending on the model. 

In some cases, you might need to set the Auxiliary, Audio Input, or Line In on the second sound bar. As a result, you will be able to position the soundbars properly.

Furthermore, the first sound system will be able to be heard through the second sound system. 

4) Customizations

It is essential to complete this step to connect two soundbars together and to make sure that they work together appropriately. In order to fully optimize the sound system, the volume settings and the EQ settings should be adjusted for the first system.

By doing so, you will be able to do all the required tweaks to your system that are essential.

In case your EQ is set too high, the sound quality of your soundbar will be very poor, and the sound will be distorted as a result. 

Due to this, it is imperative to ensure that the volume control and EQ settings are adjusted correctly. In this way, you will be able to make full use of your two soundbars and enjoy their full performance.


It is true that connecting two soundbars together can produce a significant improvement in sound quality, and you can also be sure that you will be able to experience a greater level of engaging surround sound from your home cinema system. In any case, you should conduct your research before deciding to connect two soundbars together, especially if you have no experience with this kind of setup! It’s easy to connect two soundbars, but there are several different methods, so you need to figure out which works best for you according to the ports available for audio input and output.


Can you connect two soundbars together?

It depends on the compatibility. If the ports for connecting two soundbars are available, yes you can connect two soundbars together but if not, no matter if they are from the same brand or not, they can’t be connected.

How to connect two soundbars to one tv?

Optical splitters are the most convenient and best way to connect two soundbars to one TV. However, it is imperative to note that if you try to pair two wireless subwoofers with two soundbars simultaneously, there may be some pairing issues.

Also Read

I am Jane Austen a professional blogger, Since 2018, I have worked on 200+ deferent blogs and websites. Now, I am a Team Leader at allaboutsoundbar... Facebook, Twitter, Pinterest.

Leave a Comment